Home > Tomato Machine > Automatic Tomato Powder Milling Making Machine
Professional Tomato Production Solution Expert
+86 155 3838 8305
The tomato powder making machine uses the relatively high-speed operation between the movable toothed disc and the fixed toothed disc, so that the dehydrated tomato flakes are crushed by the impact, friction and collision of the dehydrated tomato slices with each other. The grinding fineness can be adjusted between 30-150 mesh, which has the advantages of high output, fine particle size, low noise, low energy consumption, simple maintenance and convenient installation.
Cutter diameter mm
monitor rate KW
Dust removal power KW
Total Weight KG
Dust removal weight KG
Dust removal size mm
The particle size is obtained by replacing the screens with different apertures, and the grinding fineness is adjusted between 30-150 meshes;
The structure is simple, sturdy, stable in operation and good in crushing effect, and the crushed material can be directly discharged from the grinding chamber of the main machine;
The necessary equipment for the crushing process, it is not limited by the viscosity, hardness, softness and fiber of the material, and can have a good crushing effect on any material;
The tomato powder making machine is made of stainless steel, and the inner wall of the casing is all machined to achieve a smooth surface, which changes the phenomenon of rough inner wall and powder accumulation of the previous model;
1. Strong crushing ability, low energy consumption and relatively small product fineness.
2. Due to the strengthened shearing, the crushing capacity of fibrous materials is higher than that of ordinary equipment.
3. The built-in motor is designed to lower the center of gravity of the machine and effectively reduce the noise of the equipment.
4. The installation of the screen is convenient, the positioning is reliable, and the plug-in type is adopted. The service life is much higher than that of the ring screen form.
5. The crushing space is large, and the high wind pressure generated by the turbine operation can not only improve the production capacity, reduce the phenomenon of over crushing, but also effectively avoid the deposition and blockage of the screen during the crushing process. The high wind pressure can also take away the heat generated in the crushing chamber to the greatest extent.
6. The bearing seat and machine cavity of the 300, 400 and above turbo pulverizers are equipped with a water cooling device, which can effectively prevent the pulverizing cavity from heating up too fast and too high. It is suitable for pulverizing some heat-sensitive materials, including those that will change at lower temperatures. Soft or even molten material.
Remember: The increase in temperature is closely related to the air temperature and the temperature of the water used for cooling.